InductanceInductance is a physical characteristic of an inductor, which is an electrical device that produces a voltage proportional to the instantaneous change in current flowing through it. The symbol L is used for inductance in honour of the physicist Heinrich Lenz. The SI unit of inductance is the henry (H). In a typical inductor, whose geometry and physical properties are fixed, the voltage generated is as follows:
where v is the voltage generated, measured in volts di/dt is the rate of change of current, measured in ampere/second L is the inductance of the device, measured in henry. Strictly speaking, the quantity just defined is called self-inductance, because the voltage is induced in the same conductor that carries the current. If the voltage is induced in another nearby conductor, the property is called mutual inductance, which has the symbol M. The above equation, with either L or M as the constant, applies to both cases. The operation of an inductor can be understood using a simple loop of wire as an example. The current flowing through the loop of wire produces a magnetic field by Ampere's law. A change in current (di/dt) results in a change in this magnetic field. This changing magnetic field causes an electromotive force in the conductor under Faraday's law of induction, which results in a voltage (v) forming in a such a direction as to oppose the change in current (see Lenz's law). The constant of proportionality L, which tells us for a particular device how big a voltage should be expected for a given change in current, is called the inductance. The inductance L of a solenoid (an idealization of a coil) can be calculated from
where μ is the permeability of the core, measured in henrys per metre N is the number of turns A is the cross sectional area of the coil, measured in square metres l is the length, measured in metres This, and the inductance of more complicated shapes, can be derived from Maxwell's equations.
Mutual InductanceFinal ExpressionThe mutual inductance (in SI) by circuit i on circuit j is given by the double integral Derivationwhere
Ci is the enclosing curve of Si B is the magnetic field vector A is the vector potential Stokes' theorem has been used. so that the inductance is a purely geometrical quantity independent of the current in the circuits. Self-InductanceSelf-inductance, denoted L, is a special case of mutual inductance where, in the above equation, i ==j. Thus, Physically, the self-inductance of a circuit represents the back-emf described by Faraday's law of induction. UsageThe flux so that the induced emf, See also
ReferencesWangsness, Roald K. (1986). Electromagnetic Fields (2nd Ed.). Wiley Text Books. ISBN 0471811866.
Categories: Electromagnetism | Electronics |
|
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia article. Browse Wikipedia for more information. |